Regviz

NXP Semiconductors /LPC1102_04 /IOCON /RESET_PIO0_0

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as RESET_PIO0_0

Share

Cut and paste this URL to share the unmodified register and value:

https://regviz.com/r/NXP Semiconductors/LPC1102_04/IOCON/RESET_PIO0_0#0x0

31 2827 2423 2019 1615 1211 87 43 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 (SELECTS_FUNCTION_RESET)FUNC0 (INACTIVE_NO_PULL_DO)MODE 0 (DISABLE_)HYS 0RESERVED 0 (STANDARD_GPIO_OUTPUT)OD 0RESERVED

HYS=DISABLE_, MODE=INACTIVE_NO_PULL_DO, FUNC=SELECTS_FUNCTION_RESET, OD=STANDARD_GPIO_OUTPUT

Description

I/O configuration for pin RESET/PIO0_0

Fields

FUNC

Selects pin function. All other values are reserved.

0 (SELECTS_FUNCTION_RESET): Selects function RESET.

1 (SELECTS_FUNCTION_PIO0_0): Selects function PIO0_0.
MODE

Selects function mode (on-chip pull-up/pull-down resistor control).

0 (INACTIVE_NO_PULL_DO): Inactive (no pull-down/pull-up resistor enabled).

1 (PULL_DOWN_RESISTOR_E): Pull-down resistor enabled.

2 (PULL_UP_RESISTOR_ENA): Pull-up resistor enabled.

3 (REPEATER_MODE_): Repeater mode.
HYS

Hysteresis.

0 (DISABLE_): Disable.

1 (ENABLE_): Enable.
RESERVED

Reserved
OD

Selects pseudo open-drain mode. See Section 7.1 for part specific details.

0 (STANDARD_GPIO_OUTPUT): Standard GPIO output

1 (OPEN_DRAIN_OUTPUT): Open-drain output
RESERVED

Reserved

Links

()

Register Reference

https://github.com/cmsis-svd/cmsis-svd-data